Showing 1–24 of 109 results

  • GY-273 Triple-Axis Magnetometer Compass Module HMC5883L

    GY-273 Triple-Axis Magnetometer Compass

    160,00 EGP

    GY-273 Triple-Axis Magnetometer Compass Module HMC5883L

    • Operating Voltage: 3V to 6V DC
    • I2C interface
    • 1-2 degree heading accuracy
    • Integrated 12-bit ADC
    • 160Hz max data rate
    • Range of -8 to +8 Gauss
    • Needs no external components
    • Easy to use with Microcontrollers or even with normal Digital/Analog IC
    • Small, cheap and easily available
  • TCA9548A I2C 1-to-8 Channel Multiplexer Module

    TCA9548A I2C 1-to-8 Channel Multiplexer

    65,00 EGP

    TCA9548A I2C 1-to-8 Channel Multiplexer Module

    • 1 to 8 bidirectional translating switches
    • Active-low reset input
    • Three address pins—up to 8 TCA9548A devices on the same I2C bus
    • Channel selection through an I2C bus
    • Operating power supply voltage range: 1.65V to 5.5V
    • 5V tolerant pins
  • GY-BMP280-3.3 Pressure Module

    GY-BMP280-3.3 Pressure Module

    50,00 EGP

    GY-BMP280-3.3 Pressure Module

    • Model: GY-BMP280-3.3
    • Chip: BMP280
    • Power supply:  3V/3.3V DC
    • Peak current: 1.12mA
    • Air pressure range : 300-1100hPa (equi. to +9000…-500m above sea level)
    • Temperature range: -40 … +85 °C
    • Digital interfaces: I²C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
    • Current consumption of sensor BMP280: 2.7µA @ 1 Hz sampling rate
  • GY-50 L3G4200D 3-Axis Gyroscope Sensor Module

    GY-50 L3G4200D 3-Axis Gyroscope Sensor M

    150,00 EGP

    GY-50 L3G4200D 3-Axis Gyroscope Sensor Module

    •   Three selectable full scales (250/500/2000 dps)
    •   I2C and SPI digital output interface avail.
    •   Two I2C address you can select by jumpers
    •   16 bit-rate value data output
    •   8-bit temperature data output
    •   Wide supply voltage: 2.4 V to 3.6 V
    •   Low voltage-compatible IO (1.8 V)
    •   Embedded power-down and sleep mode
    •   Embedded temperature sens
  • MPU6500 Accelerometer and Gyroscope Module

    MPU6500 Accelerometer and Gyroscope Modu

    360,00 EGP

    MPU6500 Accelerometer and Gyroscope Module

    • Operating Voltage: 3-5v
    • Communication Protocol: I2C / SPI
    • Gyroscopes Range: ± 250 500 1000 2000°/s
    • Acceleration Range: ± 2 ± 4 ± 8 ± 16g
    • Dimension: 15 x 25mm
  • GY-521 MPU6050 Accelerometer and Gyroscope Module

    GY-521 MPU6050 Accelerometer and Gyrosco

    110,00 EGP

    GY-521 MPU6050 Accelerometer and Gyroscope Module

    • MEMS 3-aixs accelerometer and 3-axis gyroscope values combined
    • Power Supply: 3-5V
    • Communication : I2C protocol
    • Built-in 16-bit ADC provides high accuracy
    • Built-in DMP provides high computational power
    • Can be used to interface with other IIC devices like magnetometer
    • Configurable IIC Address
    • In-built Temperature sensor
  • GY-271 HMC5883L Compass Magnetometer Module

    GY-271 HMC5883L Compass Magnetometer Mod

    140,00 EGP

    GY-271 HMC5883L Compass Magnetometer Module

    • Gold plating PCB, applying machine welding technology, superb technique and reliably quality guarantee!
    • Name: HMC5883L Module (Triaxial Magnetic Field Module);
    • Type: GY-271;
    • Used Chip: HMC5883L;
    • Power Supply: 3~5V;
    • Communication Mode: Standard IIC communicating protocol;
    • Measuring Range: ±1.3-8 Gauss.
  • GY-87 IMU 10DOF Module With MPU6050, HMC5883L, BMP180 Sensors

    GY-87 IMU 10DOF Module With MPU6050, HMC

    500,00 EGP

    GY-87 IMU 10DOF Module With MPU6050, HMC5883L, BMP180 Sensors

    • 3-axis Gyro, Acceleration, Magnetic Field
    • Air Pressure Module
    • Build-in ultra-low noise linear LDO voltage regulator
    • Built-in onboard filters, which reduce noise from motor and other high current electronics
    • You can easily select two I2C addresses for MPU6050 by soldered jumper
    • Power LED
    • Build in the Logic level converter for I2C
    • Designed for 5V logic level
  • GY-68 BMP180 Atmospheric Pressure Module

    GY-68 BMP180 Atmospheric Pressure Module

    80,00 EGP

    GY-68 BMP180 Atmospheric Pressure Sensor

    • Can measure temperature and altitude.
    • Pressure range: 300 to 1100hPa
    • High relative accuracy of ±0.12hPa
    • Can work on low voltages
    • 3.4Mhz I2C interface
    • Low power consumption (3uA)
    • Pressure conversion time: 5msec
    • Potable size

     

  • GY-291 ADXL345 Accelerometer Module

    GY-291 ADXL345 Accelerometer Module

    135,00 EGP

    GY-291 ADXL345 Accelerometer Module

    • 3V-6V DC Supply Voltage
    • On-board LDO Voltage regulator
    • Built-in Voltage level convertor (MOSFET based)
    • It can be interface with 3.3V or 5V Microcontroller.
    • Ultra-Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
    • Tap/Double Tap Detection
    • Free-Fall Detection
    • SPI and I2C interfaces
    • Measuring Range: ±16g
    • Measuring Values (-16g to +16g):
    • X: -235 to +270
    • Y: -240 to +260
    • Z: -240 to +270
  • 37 in 1 Sensor Kit For Arduino and Microcontrollers

    37 in 1 Sensor Kit For Arduino and Micro

    1.000,00 EGP

    37 in 1 Sensor Kit For Arduino and Microcontrollers

    This kit walks you through the basics of using the Arduino board in a hands-on way. You’ll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components. Starting from the basics of electronics, to more complex projects, the kit will help you control the physical world with components.

  • PCA9685 PWM Servo Motor Driver Module,16-Channel 12-bit

    PCA9685 PWM Servo Motor Driver Module,16

    140,00 EGP

    PCA9685 PWM Servo Motor Driver Module,16-Channel 12-bit

    • Adjustable frequency PWM up to about 1.6KHz
    • 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
    • Configurable push-pull or an open-drain output
    • The output enable pin to quickly disable all the outputs
    • Terminal block for power input
    • Reverse polarity protection on the terminal block input
    • Green power-good LED
  • TP5100 Lithium Battery Charger Module Single/Double Cell 2A

    TP5100 Lithium Battery Charger Module Si

    45,00 EGP

    TP5100 Lithium Battery Charger Module Single/Double Cell 2A

    • Dual/single Lithium battery charger
    • Programmable charging current up to 2A
    • Temperature, overcurrent and undervoltage protection
    • Trickle, constant current and constant voltage charging
  • 1.3 Inch OLED Display Module, Blue, 128X64, 4Pin, I2C

    1.3 Inch OLED Display Module, Blue, 128X

    195,00 EGP

    1.3 Inch OLED Display Module, Blue, 128X64, 4Pin, I2C

    • Display type: OLED Display
    • Display size: 1.3 inch
    • Resolution: 128X64
    • Color Depth: Monochrome (Bule)
    • Wide viewing angle: more than 160°
    • Ultra-low power consumption: normal display 0.08W
    • Operating voltage: 3.3-5v
    • Operating temperature range -30~ 70 °C
  • PAM8403 Audio Amplifier Module

    PAM8403 Audio Amplifier Module

    30,00 EGP

    PAM8403 Audio Amplifier Module

    • Operating Voltage: Wide power supply ranges from 2.5V to 5.5V DC
    • Dual-channel stereo with high output power (3W+3W Output at 10% THD with a 4? Load @5v DC)
    • Max Gain 24 dB.
    • Filterless architecture
    • Low Quiescent Current and Low EMI
    • Operating Temperature: -40 to +85?C
    • Short Circuit Protection
    • Thermal Shutdown
    • Superior Low Noise
    • Efficiency up to 90%
    • Dimensions: 21x 18 x 3mm (LxWxH)
  • ACS712 Current Sensor ModuleACS712 Current Sensor Module

    ACS712 Current Sensor Module – 5A

    70,00 EGP

    ACS712 Current Sensor Module – 5A

    • 80kHz bandwidth
    • 66 to 185 mV/A output sensitivity
    • Low-noise analog signal path
    • Device bandwidth is set via the new FILTER pin
    • 1.2 m? internal conductor resistance
    • Total output error of 1.5% at TA = 25?C
    • Stable output offset voltage.
    • Near zero magnetic hysteresis
  • E3D V6 Heatsink

    E3D V6 Heatsink

    40,00 EGP

    E3D V6 Heatsink

  • PAM8403 Stereo Audio Amplifier Module

    PAM8403 Stereo Audio Amplifier Module 2x

    40,00 EGP

    PAM8403 Stereo Audio Amplifier Module 2x3W

    • Product Name: PAM8403 digital amplifier board
    • Specifications Model: GF1002
    • Power range: 5v DC
    • Minimum Output: 3W * 2
    • Dimensions: 29.5 * 20.2 * 15mm
  • Magnetic Reed Switch

    Magnetic Reed Switch NO

    12,00 EGP

    Magnetic Reed Switch NO

  • DC-DC Step-Down Module 6-24V to 5V 3A USB Output

    DC-DC Step-Down Module 6-24V to 5V 3A US

    45,00 EGP

    DC-DC Step-Down Module 6-24V to 5V 3A USB Output

    • The max output current 3A, long time use 2.1A, enough use.
    • New design, 3 solid state ceramic capacitors (MLCC).
    • Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%.
    • Flat copper inductor, improve conversion efficiency
    • With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device.
    • ?Using the latest USB identification circuit, perfectly compatible with IPHONE, the most of android- phones, IPAD etc.
    • High quality USB port.
    • Output voltage indicator (RED).
    • Input with reverse polarity protection diode, will not damage when input connect incorrect.
    • Ultra-low static current, 0.85 mA only. Do not need to add switch when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable.
  • ZB2L3 Battery Capacity Tester Module

    ZB2L3 Battery Capacity Tester Module

    110,00 EGP

    ZB2L3 Battery Capacity Tester Module

    • Input voltage: DC4.5-6V
    • Current Consumption: Less than 70mA
    • Discharge voltage: 1.00V-15.00V, 0.01V resolution
    • Termination voltage range: 0.5-11.0V
    • Maximum current: 3.000A, 0.001A resolution
    • Voltage Accuracy: 1% + 0.02V
    • Current Accuracy: 1.5% ? 0.008A
    • Maximum capacity: 9999Ah (1Ah = 1000mAh)
    • Dimensions: 50 x 37 x 17mm (L x W x H)
    • Weight: 55g
  • 3Pin LDR Module - Optical Sensitive Resistance Light Detection Sensor Module

    3Pin LDR Module – Optical Sensitiv

    30,00 EGP

    3pin LDR Module – Optical Sensitive Resistance Light Detection Sensor Module

    • Using the sensitive type photoresistor sensor
    • The comparator outputs a signal clean, good waveform driving ability more than 15mA.
    • With adjustable potentiometer can adjust the light intensity detected
    • The working voltage: 3.3V-5V
    • The output format: Digital switching output (0 and 1)
    • With a fixed bolt holes for easy installation
    • Small PCB board size: 3.2cm x 1.4cm
  • YK04 Wireless Remote Control Kit 4 Channel 315MHz

    YK04 Wireless Remote Control Kit 4 Chann

    120,00 EGP

    YK04 Wireless Remote Control Kit 4 Channel 315MHz

    Transmitter Specs.:

    • Chip: SC2262
    • Keys: 4 Key Remote Control
    • Channel No.: 4CH
    • Powered By 1 x DC 12V 23A Battery(Not Included Here)
    • Operating Current: 10mA
    • Resonance Mode: ASK
    • Operating Frequency: 315MHZ
    • Transmitting Distance: 120-150M
    • Coding Type: Rolling Code
    • Dimensions: 6 x 3.8 x 1.3cm/2.4″ x 1.5″ x 0.51″(L*W*T)

    Receiver Specs:

    • Voltage: DC5V
    • Chip: SC2272-M4
    • Frequency: 315-433MHZ
    • Dimensions: 4 x 2.8 x 0.6cm/1.6″ x 1.1″ x 0.24″(L*W*T)
  • W1219 Dual Display Temperature Controller

    W1219 Dual Display Temperature Controlle

    140,00 EGP

    W1219 Dual Display Temperature Controller 12Vdc

    • Model: XH-W1219
    • Control range: -50?C to 110?C
    • Control accuracy: 0.1?C
    • Measurement input: NTC10K waterproof sensor L=0.5M
    • High temperature alarm: -49?C to 110?C
    • Input voltage: DC 12V
    • Output type: relay output up to 10A
    • Return difference setting: 0.1?C to 30?C
    • Delayed start: 0-10 minutes
    • Temperature correction: -10?C to +10?C
    • Size: 60*43*16mm (length*width*height)