Showing all 6 results

  • PCA9685 PWM Servo Motor Driver Module,16-Channel 12-bit

    PCA9685 PWM Servo Motor Driver Module,16

    140,00 EGP

    PCA9685 PWM Servo Motor Driver Module,16-Channel 12-bit

    • Adjustable frequency PWM up to about 1.6KHz
    • 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
    • Configurable push-pull or an open-drain output
    • The output enable pin to quickly disable all the outputs
    • Terminal block for power input
    • Reverse polarity protection on the terminal block input
    • Green power-good LED
  • Mechanical Arm Gripper Claw

    Metal Mechanical Arm Gripper Claw (2DOF)

    200,00 EGP

    Metal Mechanical Arm Gripper Claw (2DOF)

    • Degree of Freedom(DOF): 2
    • Claw Material: Aluminum Alloy3
    • Clamp Total Length: 108mm
    • Clamp Total Width: 98mm
    • Maximum Opening: 55mm
    • Claw Weight: 68gm
  • 25T Aluminum Servo Motor Disc Horn

    25T Aluminum Servo Motor Disc Horn

    11,50 EGP

    25T Aluminum Servo Motor Disc Horn

    • Item Name: Servo Disk Horn
    • Material : Aluminum
    • Finish: Anodized
    • Color: Silver
    • Teeth no: 25T
    • Hight: 5mm
    • Diameter: 20mm
    • Weight 4gm
  • MG90S Micro Servo Motor 2.2 kg.cm Metal Gears

    MG90S Micro Servo Motor 2.2 kg.cm Metal

    150,00 EGP

    MG90S Micro Servo Motor 2.2 kg.cm Metal Gears

    • Main Material : Plastic
    • Electric Parts, Metal
    • Operating Speed : 0.11sec/60 Degrees (4.8V No Load) 0.10sec/60 Degrees (6.0V No Load).
    • Stall Torque : 2.2kg/cm (4.8V) 2.5kg/cm (6.0V)
  • SG90 Micro Servo Motor

    SG90 Micro Servo Motor

    100,00 EGP

    SG90 Micro Servo Motor

    • Used as actuators in many robots like Biped Robot, Hexapod, robotic arm etc..
    • Commonly used for steering system in RC toys
    • Robots where position control is required without feedback
    • Less weight hence used in multi DOF robots like humanoid robots
  • MG996R Servo Motor Metal Gear (11kg/cm)

    MG996R Servo Motor Metal Gear (11kg/cm)

    220,00 EGP

    MG996R Servo Motor Metal Gear (11kg/cm)

    • Operating Voltage is +5V typically
    • Current: 2.5A (6V)
    • Stall Torque: 9.4 kg/cm (at 4.8V)
    • Maximum Stall Torque: 11 kg/cm (6V)
    • Operating speed is 0.17 s/60?
    • Gear Type: Metal
    • Rotation : 0?-180?
    • Weight of motor : 55gm
    • Package includes gear horns and screws