Showing 1–24 of 40 results
-
4.000,00 EGPBIGTREETECH PITFT70 V2.0 LCD Display For Raspberry Pi
The creation of OctoPrint for 3D printing has allowed Makers all over the world to gleefully monitor and control their 3D printers remotely. As any of these Makers could tell you, Raspberry Pi is an incredibly powerful mini-computer board that is capable of so much and is considered open-source to all. This means brands like BigTreeTech, a reliable supplier of quality Maker technologies, can enhance our Maker experience further with fun Raspberry Pi accessories. We were delighted to see one of our favorite brands of 3D Pinter Upgrades come out with the BTT Pi TFT70 V2.0 Touch LCD Display for Raspberry Pi!
-
3.125,00 EGPBIGTREETECH TFT35 V3.0.1 Display- Two Working Modes
-
3.125,00 EGPBIGTREETECH SKR MINI E3 V3.0 32 Bit Control Board
This new SKR Mini E3 V3.0 motherboard uses the STM32F103RET6 main control chip, and its flash memory size is 512K. Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V3.0 version of the fan is not ready to use after power on). The hotbed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduced heat generation. BLTouch is an auto-leveling sensor for 3D Printers based on open-source. Simple, Smart, High-precision.It could work with any kind of bed material, such as glass, wood, metal, and so on. This kit with 80cm extension wire.
-
3.125,00 EGPBIGTREETECH TFT35-E3 V3.0 Touch Screen Display
-
1.625,00 EGPBIGTREETECH TFT24 V1.1 Color Touch Screen with 12864 LCD Display
-
820,00 EGPBIGTREETECH MINI12864 V1.0 2.4 Inch LCD Screen
-
195,00 EGP1.3 Inch OLED Display Module, Blue, 128X64, 4Pin, I2C
- Display type: OLED Display
- Display size: 1.3 inch
- Resolution: 128X64
- Color Depth: Monochrome (Bule)
- Wide viewing angle: more than 160°
- Ultra-low power consumption: normal display 0.08W
- Operating voltage: 3.3-5v
- Operating temperature range -30~ 70 °C
-
2.850,00 EGPTwo Trees TFT35 V3.1 Display – Two Working Modes
- Supply voltage: 5 Vdc
- SD card reader logic voltage: 3.3 – 5 Vdc
- Display diagonal: 3,5”
- Controller chip: STM32F207VCT6 32-bit with ARM Cortex-M3 core
- Two operating modes: touch screen display or LCD 12864
- Module equipped with USB port and SD card socket
- Dimensions: 110 x 58 mm
-
125,00 EGPRGB LED Strip 5 Meter 300 LEDs
-
20,00 EGPCOB LED Chip 5W Cool white
-
100,00 EGP1604 LCD Display Blue Backlight – 16×4 Character
Gross Weight (kg) 0.0700
Part Number(Order Number) 1604 LCD
Connection Pin Header
Display Format 16×4 Character
Sunlight Readable No
Touch Panel Optional No
Outline Dimension 87.0(W)x60.0(H)x12.5(T)mm
-
500,00 EGP3.5 Inch TFT LCD Shield Touch Display Module for Arduino
- Screen Size: 3.5(inch)
- Type: TFT
- Driver IC: ILI9486
- Resolution: 480*320 (Pixel)
- Module Interface: 8-bit parallel interface
- Active Area: 73.44*48.96(mm)
- Module PCB Size: 85.49*55.63(mm)
- Operating Temperature:-20?~70?
- Storage Temperature: -40?~70?
- Operating Voltage: 5V/3.3V
- Product Weight: 44Gm
-
285,00 EGP2.4 Inch TFT LCD Shield Touch Display Module for Arduino
- Screen Size: 2.4(inch)
- Type: TFT
- Driver IC: ILI9341
- Resolution: 320*240 (Pixel)
- Module Interface: 8-bit parallel interface
- Active Area: 48.96*36.72(mm)
- Module PCB Size: 72.20*52.7(mm)
- Operating Temperature:-20?~60?
- Storage Temperature: -30?~70?
- Operating Voltage: 5V/3.3V
- Product Weight: 39Gm
-
350,00 EGP2.8 Inch TFT LCD Shield Touch Display Module for Arduino
- Driver Chip: ILI9341 / HX8347
- Resolution: 320×240 (Pixel)
- Module Interface: 8-bit parallel interface
- Effective Display Area: 43.2×57.6mm
- Working temperature: -20? ~ 70?
- Storage temperature: -40? ~ 70?
- Working Voltage : 5V
- Power consumption: about 90mw
-
45,00 EGP75Pcs Mixed Color 5mm LED Pack With Free Storage Box
Package Includes
- 15 x 5mm size White LED
- 15 x 5mm size Red LED
- 15 x 5mm size Green LED
- 15 x 5mm size Yellow LED
- 15 x 5mm size Blue LED
- 1 x Free Storage Box
-
3,00 EGP3 LED lighting Module 12Vdc 5054 SMD Waterproof – Cool white
-
2,50 EGPLED RGB Cathode 4-PIN (5mm)
-
2,75 EGPPlastic Box Mount LED Holder (5mm)
-
0,35 EGPLED 5mm Yellow color Long pin
-
0,35 EGPLED 5mm White color Long pin
-
0,35 EGPLED 5mm Red color Long pin
-
0,35 EGPLED 5mm Green color Long pin
-
0,35 EGPLED 5mm Blue color Long pin
-
0,35 EGPLED 3mm Yellow color Long pin
