-


45,00 EGPDC-DC Step-Down Module 6-24V to 5V 3A USB Output
- The max output current 3A, long time use 2.1A, enough use.
- New design, 3 solid state ceramic capacitors (MLCC).
- Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%.
- Flat copper inductor, improve conversion efficiency
- With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device.
- ?Using the latest USB identification circuit, perfectly compatible with IPHONE, the most of android- phones, IPAD etc.
- High quality USB port.
- Output voltage indicator (RED).
- Input with reverse polarity protection diode, will not damage when input connect incorrect.
- Ultra-low static current, 0.85 mA only. Do not need to add switch when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable.
-


80,00 EGPXL4005 Step Down Module (5A)
- Module properties: non-isolated step-down module ( BUCK )
- Rectification: non-synchronous rectifier
- Input voltage: DC 4V ~ 38V
- Output voltage: DC 1.25V ~ 32V ( adjustable )
- Output current: 0A ~ 5A
- Output power: 75W ( more than 50W please add heat sink )
- Operating Frequency: 180KHz
- Operating Temperature: -40?C ~ +85?C
- Load regulation: S(I)?0.8%
- Voltage regulation: S(u)?0.8%
-


115,00 EGPXL6009 4A DC-DC Adjustable Step-up Power Module With LED Voltmeter
-


40,00 EGPOutput Current: 1.5A (minimum), 2.2A (typ)
? Input and output voltage difference (VI-VO): 40Vdc (max)
? Adjustable output voltage range: 1.2 ~ 37V
? Operating temperature: -55 to +150
? Output Current: 1.5A
? Input voltage: 4.2 ~ 40 V
? Characteristics Frequency: 100 (MHz)
? Module size: 35.6 (mm) x16.8 (mm)
? Input: VIN positive input stage, GND negative input
? Output: VOUT output positive level, GND output negative
? Maximum output current: maximum output current = 3 / (Input voltage – output voltage)
Applications
Mobile phone, MP3, MP4, PS P, and much other charging equipment
-


70,00 EGPLM2596S DC-DC Converter Step-Down Power Module With LED Voltmeter
-


50,00 EGPVariable Output DC-DC Step Down Converter (based on LM2596S)
The DC-DC module based on LM2596 advocate current to 3.0A, but only to 1.8A.However, being introduced module adds a heatsink, using high-power devices.This module can easily reach 4A, 50W, add heat sink circumstances can reach 75W.
Features:
Module highlights: 5A high power?high efficiency and low ripple with power indicator.
Input voltage range?4?38VDC (Note:input voltage not exceeding 38V)
Output voltage range?1.25-36VDC adjustable
Output current: 0-5A, recommended for use in 4.5A.
Output power: 75W
Working temperature: -40~+85 degrees
Operating frequency: 180KHz
Efficiency:96%?max)
Short circuit protection: yes (limit current 8A).
Over temperature protection
Input reverse polarity protection: None (if required, high current diode in series with the input).
L x W x H = 54 * 23 * 18mm
-


95,00 EGP150W DC-DC Booster Adjustable Step-Up Converter 6A
-


20,00 EGPDC-DC USB Step-up Boost Module 0.9-5V to 5Vdc-600mA
- Input voltage: 0.9-5V DC
- Mini PFM Control
- Output voltage: 5V DC
- Output Current: 500-600mA
- High conversion efficiency, maximum to 96%
-


130,00 EGPXL4015 DC-DC Step Down Module with Voltmeter 5A
- Input voltage: 4 – 38V
- Output voltage: 1.25 – 36V (adjustable)
- Output current: Maximum output current 5A
- Note: The higher the voltage, the load current increases. Try to use it within 4.5A.
- Output power: It is recommended to use within 75W
- Note: Heat sink required if output power exceeds 50W
- Efficiency of this regulator up to 96%
- Note: Efficiency is related to input, output voltage, current, and the voltage difference
- Load regulation: 0.8%
- Voltage regulation: 0.8%
- Adjustable potentiometer onboard for output voltage adjustment.
- Power LED indicator
- Thermal Protection enabled.
- Short circuit proportion: limited to 8A.
- Dimension: 54*23*18 mm (L*W*H)
-


50,00 EGPXL6009 DC-DC Boost Converter Module
- Input voltage: 3 – 32V
- Output voltage: 5 – 35V (adjustable)
- Output current: Maximum output current 4A
- Note: The higher the voltage, the load current increases.
- Efficiency of this regulator upto <94%
- Load regulation: 0.5%
- Voltage regulation: 0.5%
- Adjustable potentiometer onboard for output voltage adjustment.
- Non – isolated constant voltage module.
- Non – synchronous rectification.
- Short circuit proportion: current limiting since the recovery.
- Dimension: 45*20*14 mm (L*W*H)
-


30,00 EGPMini-360 DC-DC Buck converter