Showing 1–24 of 34 results
-


8,00 EGPDS-212 Push Button Black Round N.O, 16mm
- SPST contact
- Momentary operation
- 3A contact current
- 250V AC contact voltage
- Solder lug terminal
- Contact rating 3A 125V AC, 1.5A 250V AC
-


8,00 EGPDS-212 Push Button Red Round N.O, 16mm
- SPST contact
- Momentary operation
- 3A contact current
- 250V AC contact voltage
- Solder lug terminal
- Contact rating 3A 125V AC, 1.5A 250V AC
-


35,00 EGPHorizontal Mechanical Endstop Switch Module
- Normally open mechanical limit switch, small size, easy installation
- With a trigger light. Used with 3D printer motherboard, it’s plug and play.
- Product Name: Mechanical Limit Switch
- Commonly used in 3D printer: 3-Pin mechanical limit switch
- Compatible with all 3D printers
- A good Quality and reliable
- Dimension: 22.5x27x9.25mm
- Length: 22.5mm
- Width: 27mm
- Hight: 9.25mm
-


40,00 EGPCreality Ender-3/PRO Endstop Switch Module
- Commonly used in 3D printer: 3-Pin mechanical limit switch
- Compatible with Ender-3/PRO, CR-10 Series 3D printers
- Small and compact size, easy installation, just plug and play.
- A good and reliable accessories
- Dimension: 20.5×20.5×9.25mm
- Length: 20.5mm
- Width: 20.5mm
- Hight: 9.25mm
-


15,00 EGPMomentary Push Button Complete Unit, 22mm, 2NO/NC
- Variety of bezel and color options with aesthetic design.
- Mounting depth less than 46.8 mm below panel.
- Up to 6 contact blocks (3 contact blocks across and 2 rows deep).
- Symmetrical contact block.
- Push-in Plus terminal block type.
- Snap-in switch unit for quick and easy mounting.
-


4,00 EGPPush Button Square Red N.O – 12mm
- SPST contact
- Off-On operation
- 3A contact current
- 250V AC contact voltage
- Solder lug terminal
- Contact rating 3A 125V AC, 1.5A 250V AC
-


1,50 EGPSquare Tactile Switch Cap
- Product Name: Switch Cap
- Material: Plastic
- Inner Size: 3.8 x 3.4mm/0.15 x 0.13inch(L*W)
- Overall Size : 12x12x5.8mm/0.47×0.47×0.23inch(L*W*H)
- Detailed Size: Pls see above picture
- Fit Switch: 12*12*7.3mm Square-Head Tactile Switch
- Net Weight: 8g
-


2,50 EGPOmron Press 4-Pin (12×12), B3F Tactile Switch
Stainless Steel cover
Stainless Steel contacts with silver cladding
Wave soldering 260?C 10 seconds. Max.
Operating temperature range -40?C to +85?C
-


6,00 EGPMicro Limit Switch (MS.2 – 20.0×10.0x6.0mm)
- Operating temperature: -40?C to 70?C
- Rated voltage: AC 125V-250V
- Per weight: 2g
- Current rating: 5A
- Size: 20 x 10 x 6mm (L X W X H)
- PCB Terminals Circuit Board
- With Roller Lever Limit
-


6,00 EGPLimit Switch With Roller Wheel (MS.2 – 20.0×10.0x6.0mm)
- Operating temperature: -40?C to 70?C
- Rated voltage: AC 125V-250V
- Per weight: 2g
- Current rating: 5A
- Size: 20 x 10 x 6mm (L X W X H)
- PCB Terminals Circuit Board
- With Roller Lever Limit
-


2,50 EGP- Model number: KCD11-101
- Switch type: On/Off Rocker Switch
- Terminals: 2
- Rated voltage: 3A 250VAC, 6A 125VAC
- Current: 3A
- Panel hole size: 12 x 8mm
- Overall size: 21 x 15 x 10mm (H x L x W)
- Material: PLASTIC
- Color: Black
-

9,00 EGP9 Way Red DIP Switch, 2.54mm Pitch
-

12,00 EGP12 Way Red DIP Switch, 2.54mm Pitch
-


3,16 EGPOn/Off Switch PCB 6pin 8?8 Blue ON/OFF Button
-


3,16 EGPOn/Off Switch PCB 3pin SPDT Switch
-


12,00 EGPLimit Switch With Roller Wheel (MS.3 – 28.0 x 15.5 x 9.5 mm)
-


4,00 EGPLimit Switch (MS.1 – 12.8 x 5.7 x 5.4mm)
-


5,00 EGPBoat Rocker Switch ON-OFF-ON (6A,250VAC)
-


3,00 EGP12mm Blue Thermal Double-Sided Tape – 25 Meter
-


8,00 EGPElectrolytic Capacitor 4700uF 35v
-


5,00 EGP5 Way Red DIP Switch, 2.54mm Pitch
-


3,00 EGPCamelion LED Head Light 3 Mode adjustable angle With AAA Batteries
-


3,00 EGPMale to Female – 30cm 10 Pin Jumper Wire Set
-


10,00 EGP10 Way Red DIP Switch, 2.54mm Pitch