Horizontal Mechanical Endstop Switch Module Normally open mechanical limit switch, small size, easy installation With a trigger light. Used with 3D printer motherboard, it's plug and play. Product Name: Mechanical Limit Switch Commonly used in 3D printer: 3-Pin mechanical limit switch Compatible with all 3D printers A good Quality and reliable Dimension: 22.5x27x9.25mm Length: 22.5mm Width: 27mm Hight: 9.25mm
Creality Ender-3/PRO Endstop Switch Module Commonly used in 3D printer: 3-Pin mechanical limit switch Compatible with Ender-3/PRO, CR-10 Series 3D printers Small and compact size, easy installation, just plug and play. A good and reliable accessories Dimension: 20.5x20.5x9.25mm Length: 20.5mm Width: 20.5mm Hight: 9.25mm
Spring Lever Connector 4-Way Single multi-strand rigid conductor:0.08-4mm² Stranded flexible conductor:0.08-4mm² Rated voltage:250V Rated current:32A Strip length: 9 - 10 mm / 0.37 in Maximum operating temperature: 105℃
Spring Lever Connector 3-Way Single multi-strand rigid conductor:0.08-4mm² Stranded flexible conductor:0.08-4mm² Rated voltage:250V Rated current:32A Strip length: 9 - 10 mm / 0.37 in Maximum operating temperature: 105℃
Spring Lever Connector 2-Way Single multi-strand rigid conductor:0.08-4mm² Stranded flexible conductor:0.08-4mm² Rated voltage:250V Rated current:32A Strip length: 9 - 10 mm / 0.37 in Maximum operating temperature: 105℃
Two Trees TFT35 V3.1 Display - Two Working Modes Supply voltage: 5 Vdc SD card reader logic voltage: 3.3 - 5 Vdc Display diagonal: 3,5'' Controller chip: STM32F207VCT6 32-bit with ARM Cortex-M3 core Two operating modes: touch screen display or LCD 12864 Module equipped with USB port and SD card socket Dimensions: 110 x 58 mm
DM542 Stepper Motor Driver 4.2A, 18-50Vdc Input voltage 18-50VDC. Output current programmable, from 1A to 4.2A. Pulse input frequency up to 200 KHz. Suitable for 2-phase and 4-phase motors. TTL compatible and optically isolated input. Support PUL/DIR and CW/CCW modes. Operating Temperature : 70 C.
TMC2209 V2 Stepper Motor Driver Module Ultra quiet Large heat sink, good heat dissipation Support sensor less-homing function. Support UART mode by set jumper caps instead of welding on MKS GEN_L V2.0,skr1.3/1.4.
E18-D80NK Infrared Photoelectric Switch Sensor Input Voltage: 5V Current Consumption: 25-100 mA Response time <2ms Sensor type: Diffuse reflective type Sensing range: 3-80 cm Cable length: 45 cm
Description: Lerdge-X is a highly integrated control board designed for small 3D printers,educational 3D printer,and beginner level 3D printers It is using 32bit Coretx-M4 Control Module with 3.5 Inch full color IPS Touch Screen With Open Interface Support A4988,TMC2209,DRV8825,LV8729,TMC2100 and other External Drive Lerdge-X contains Pause,Saving and Resume. To enable Power Resume and Auto Turn-off, a Power Management Module is…
