608ZZ Shielded Miniature Ball Bearing 8x
10,00 EGP608ZZ Shielded Miniature Ball Bearing 8x22x7mm
- Model: 625
- Material: Sheet Steel
- Size: 8x22x7mm
- Inner Diameter: 8mm
- Outer Diameter: 22mm
- Thickness: 7mm
- Rows Of Balls: single row
- Seal: ZZ
No products in the cart.
Showing 1–24 of 429 results
608ZZ Shielded Miniature Ball Bearing 8x22x7mm
eSUN eTPU-95A White Color Filament 1.75mm – 1kg/Roll
eSUN eTPU-95A Black Color Filament 1.75mm – 1kg/Roll
eSUN eMarble Filament Natural 1.75mm – 1kg/Roll
eMarble is a PLA based 3D printing material with cool appearance as marble and the characteristics of easy to print as PLA.
Cool like-marble appearance.
This material is based on PLA material with glitter powder, with characteristics of easy to print as PLA and special glittering color.
Special glittering color.
eSUN White Color eSilk-PLA Filament 1.75mm – 1kg/Roll
The model printed by silk PLA filament has shinny and silk luster texture. The PLA silk filament’s printing surface is smooth without layer patterns.
The silk PLA filament is modified from PLA material ,as easy to print as PLA. High toughness is one of PLA silk filament‘s advantages.
eSUN Wood 3d Printer Filament 1.75mm – 0.5kg/Roll
This is a PLA based 3D printing material with cool appearance like wood. It was the characteristics of easy to print and smooth surface as PLA.It tilize active foaming technology to achieve like-wood appearance with low-density PLA of 0.7g/cm3.
Low-density PLA of 0.7g/cm3.
eSUN Natural Color 3d Printer Filament PLA 1.75mm – 1kg/Roll
PLA is an environment-friendly material that is easy to print and has smooth surface. Compared with ABS, PLA has higher rigidity and strength similar to PC, and does not need to close the cavity, low shrinkage rate, no warping, no cracking, and can print large size model, No pungent smell when printing, safe and environmental protection. Approved by FDA, safer to use, It can be used for conceptual model, rapid prototyping, and metal parts casting.
eSUN Clear Color 3d Printer Filament PLA 1.75mm – 1kg/Roll
PLA is an environment-friendly material that is easy to print and has smooth surface. Compared with ABS, PLA has higher rigidity and strength similar to PC, and does not need to close the cavity, low shrinkage rate, no warping, no cracking, and can print large size model, No pungent smell when printing, safe and environmental protection. Approved by FDA, safer to use, It can be used for conceptual model, rapid prototyping, and metal parts casting.
eSUN Luminous Blue Color 3d Printer Filament PLA 1.75mm – 1kg/Roll
The product is modified based on PLA material, in addition it has gorgeous luminous appearance effect. PLA is an environmentally friendly material and easy to print.
ER16 Collet Size 6mm
BIGTREETECH Mini UPS V2.0 Module – 12V
BIGTREETECH PITFT70 V2.0 LCD Display For Raspberry Pi
The creation of OctoPrint for 3D printing has allowed Makers all over the world to gleefully monitor and control their 3D printers remotely. As any of these Makers could tell you, Raspberry Pi is an incredibly powerful mini-computer board that is capable of so much and is considered open-source to all. This means brands like BigTreeTech, a reliable supplier of quality Maker technologies, can enhance our Maker experience further with fun Raspberry Pi accessories. We were delighted to see one of our favorite brands of 3D Pinter Upgrades come out with the BTT Pi TFT70 V2.0 Touch LCD Display for Raspberry Pi!
BIGTREETECH SKR V1.4 Turbo Control Board
BIGTREETECH GC6609 V1.0 Stepper Motor Driver Module
BIGTREETECH SKR1.4 Control Board
BIGTREETECH TFT35 V3.0.1 Display- Two Working Modes
BIQU H2 All-metal Stainless steel Heat break Throat
BIQU H2 V2.0 Dual Gear Direct Extruder Kit
TMC2209 V2 Stepper Motor Driver Module
BIGTREETECH SKR MINI E3 V3.0 32 Bit Control Board
This new SKR Mini E3 V3.0 motherboard uses the STM32F103RET6 main control chip, and its flash memory size is 512K. Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V3.0 version of the fan is not ready to use after power on). The hotbed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduced heat generation. BLTouch is an auto-leveling sensor for 3D Printers based on open-source. Simple, Smart, High-precision.It could work with any kind of bed material, such as glass, wood, metal, and so on. This kit with 80cm extension wire.