CP2102 USB to TTL Converter

CP2102 USB to TTL Converter

  • Stable and reliable chipset CP2102.
  • USB specification 2.0 compliant with full-speed 12Mbps.
  • Standard USB type A male and TTL 6pin connector.
  • All handshaking and modem interface signals.
  • Baud rates: 300 bps to 1 Mbps.
  • Byte receives buffer; 640 bytes transmit buffer.
  • Hardware or X-On/X-Off handshaking supported.
  • Works with existing COM port PC Application
    • Windows 8/7/Vista/Server 2003/XP/2000/CE
    • Mac OS-X/OS-9
    • Linux
  • USB suspend states supported via SUSPEND pins.
  • Size: 50mm X 20mm.
SKU: 23385
shield

Safe shopping

Your data is always protected

Sale_coupon_15

170,00EGP

In stock

In stock

16 People watching this product now!
  • shop Pick up from the Store

Everyday from 9 AM to 7 PM

  • aramex ARAMEX DELIVREY

2-3 Days

Total fees when checkout

  • product-return Return within 14 days

Payment Methods:

Description

CP2102 USB to TTL Converter

This CP2102 UART module is a USB to TTL UART Converter module which is based on CP2102 Bridge by SiLabs. This CP2102 UART module is compliant with USB2.0 full-speed devices with an integrated transceiver. The USB function controller manages all data transfers between the USB and the UART as well as command requests generated by the USB host controller and commands for controlling the function of the UART. The USB Suspend and Resume signals are supported for power management of both the CP2102 device as well as external circuitry..

CP2102 USB to TTL Pin Out:

Pin Name

Description

VCCIO

Jumper Configurable VCC (3.3v or 5v) Out Pin

GND

Ground

PWR LED

Power Indicator LED

TxD

Asynchronous data output (UART Transmit)

Tx LED

UART Transmit (data out) Indicator LED

RxD

Asynchronous data input (UART Receive)

Rx LED

UART Receive (data in) Indicator LED

RTS

Ready to Send control output (active low)

CTS

Clear To Send control input (active low)

GND

Ground

Device Reset. The open-drain output of internal POR or VDD monitor. An external source can initiate a system reset by driving this pin low for at least 15 μs.

This pin is driven low when the CP2102/9 enters the USB suspend state.

SUSPEND

This pin is driven high when the CP2102 enters the USB suspend state

RI

Ring Indicator control input (active low)

DCD

Data Carrier Detect control input (active low)

DTR

Data Terminal Ready control output (active low)

DSR

Data Set Ready control input (active low)

 

Package Includes:

  • 1x CP2102 USB to TTL Converter

Documents:

Related Products:

CP2102 USB to TTL Converter

Customer Reviews